Menu
UVmount is a cold mounting system that utilizes ultraviolet (UV) light to rapidly cure resin in as little as 60 seconds. By pouring the liquid resin into dedicated molds and placing them inside the chamber, up to 20 fully transparent specimens can be prepared simultaneously. With its streamlined operation and ultrafast curing process, UVmount delivers efficient and high-quality sample preparation.
Features
1、Automatic or manual operation of the chamber door;
2、One-click start for automatic sample loading and unloading;
3、4.3-inch touchscreen for display and operation;
4、The irradiation time can be freely set, and it is equipped with 4 preset timer buttons for quick selection;
5、The dual-layer light source provides uniform illumination without any blind spots;
6、Achieves uniform curing from the inside out;
7、Low heat generation during curing, with the maximum temperature during curing not exceeding 90°C;
8、Dual-fan cooling system;
9、Exhaust and air purification system.
Technical Parameters
|
Model |
UVmount |
|
Demension of curing area |
230*180 mm |
|
Max. height |
50 mm |
|
Curing time |
0~999 sec. |
|
Type of UV Light |
Ultraviolet Light (Main Wavelength: 365nm) |
|
Voltage/Frequency |
85~240V, 50/60Hz (1Ph/N/PE) |
|
W*D*H |
400x404x188mm (Closed); 400x651x188mm (Open) |
|
Weight |
21kg |
Based in China, TROJAN pays attention to the international market, and has sold metallographic equipment to more than 50 countries, such as Europe, America, Japan and South Korea, Southeast Asia countries and regions
Copyright 2025 Trojan (Suzhou) material technology Co., Ltd.